Ecore Bounce 2 Motivate Class 1 | Wood-Look Sports and Fitness Flooring
Ecore Bounce 2 Motivate Class 1 is a wood-look sports and fitness floor with a fiberglass-reinforced 2 mm vinyl surface fusion bonded to a 5 mm vulcanized composition rubber (VCR) Motivate base. The 72 in (1.83 m) wide roll creates a seamless, easy-to-maintain surface for multi-purpose courts, group exercise and common areas.
Class 1 Force Reduction, Energy Return & Indentation Recovery
Fusion bonding with itsTRU® technology gives Bounce 2 Class 1 force reduction (11.9%), 68.4% energy restitution and strong recovery from point and rolling loads. A 27 mil wear layer provides commercial durability, and the 2.5 in board-width wood-grain look suits courts, studios and multi-use rooms. Weld rod is required and the floor is for indoor use only.
- Wood-look surface with 2.5 in board widths
- 27 mil wear layer for commercial durability
- Fiberglass-reinforced 2 mm vinyl surface layer
- 5 mm VCR Motivate base layer
- 72 in (1.83 m) wide rolls, 30 LF (9.14 m) standard
- Class 1 force reduction and 68.4% energy restitution
- Passes ASTM F2772 sports floor and F2753 rolling load tests
- Quiet underfoot and easy to maintain
Used In
- Sports training and performance facilities
- University and college athletic facilities
- K–12 school athletic facilities
- Commercial health clubs
- Active aging and rehab facilities
- Corporate wellness facilities
Looking to expand your setup? Explore more Ecore Equipment for your training.
- Wood-look sports flooring roll
- 7 mm (2 mm + 5 mm) construction
- 72 in (1.83 m) wide, 30 LF standard
- Class 1 force reduction
- 27 mil wear layer
- Weld rod required
- Indoor use only
- Performance
- Force Reduction: 11.9% (Class 1)
- Energy Restitution: 68.4%
- Recovery after Static Load (ASTM F970): 0.004 in (0.10 mm) @250 PSI; 0.008 in (0.20 mm) @500 PSI
- Dynamic Rolling Load (ASTM F2753): No change, no damage @10,000 cycles
- Coefficient of Friction (ASTM D2047): >0.8
- Noise Reduction Coefficient (ASTM C423): 0.15
- Impact Insulation Class (ASTM E492): 52
- Delta IIC (ASTM E2179): 23
- Comfort & Features
- Wear Layer: 27 mil
- Surface Layer: Fiberglass-reinforced 2 mm vinyl
- Base Layer: 5 mm vulcanized composition rubber (VCR) Motivate
- Certification: FloorScore CA 01350
- Critical Radiant Flux (ASTM E648): Class I
- Abrasion Resistance (ASTM D3389): Pass
- Installation: Weld rod required; indoor use only
- Dimensions & Capacity
- Thickness: 7 mm (2 mm + 5 mm)
- Width: 72 in (1.83 m)
- Standard Roll Length: 30 LF (9.14 m)
- Maximum Roll Length: 45 LF (13.72 m)
